TracStar MVS1000-P4 SERIES |
The MVS “P” Series from TracStar allows non-skilled personnel to operate mobile Very Small Aperture Terminal (VSAT) satellite communications equipment enabling the user to access any broadband application over satellite. The antennas are: *Portable *Fly–Away (ship as air cargo) *Multi-piece Reflectors *Easily Assembled *Shipped in Ruggedized Cases
The MVS Series antennas are typically owned and operated by: *Corporations with remote or mobile office and monitoring applications *Federal, state and local government agencies for law enforcement, emergency response and home-land security communications *Military rapid deployment, SATCOM on the pause applications
With TracStar’s MVS Series antennas, users enjoy the same reliable, secure, high-speed IP based data communications they are accustomed to in the office, while mobile. Users can get connected Anywhere/Anytime for applications such as: *Secure, high-speed digital communications *High-speed Internet access *Voice and Fax communications *Teleconferencing *Wide area private network extension *Video broadcasting
The MVS Series of auto-acquisition antennas feature: *Automatic satellite acquisition with a single button push *Rapid deployment and operation on every Ku-band satellite, worldwide *Works with every satellite modem *TracStar Technology eliminates theneed for - -Special test equipment for antenna alignment -Computers or peripheral equipment to operate the antenna -Phone calls to network operators or service providers
Every antenna comes equipped with the following standard equipment: *High precision and stiffness, low backlash drive system *Built-in GPS and compass *Built-in satellite receiver *Built-in level compensation *Automatic polarization alignment *Safe and easy installation, no calibrations required
MVS 1000-P4 Specifications
Reflector Reflector 1.0M Carbon Fiber-Four Sector Feed System Standard VSAT; Optional Global Mode-Matched Mount Geometry Elevation over Azimuth Polarization Rotation of Reflector/Feed about Boresight
Travel Computer Control Manual Control (Crank) Azimuth Full Coverage ±200° from Stow Position ±200° from Stow Position Elevation Standard Configuration 10°- 65° of reflector boresight 10°- 90° of reflector boresight Polarization ±95° ±95°
Travel Velocity Slewing/Deploying 2°/second Peaking 5°/second Manual Jog 1.0° or 0.2°/second
Electrical Interface RF 75Ω Tx / Rx Type F Connector (50Ω option) Interfacility Link 30 ft: 2ea. RG6 Coax, 1 Control Cable Motors 24VDC Servo w/Optical Encoder Controller (1U) / Power Supply 50/60Hz, 110/220VAC, Single Phase Power Consumption – Motors Active 250 Watts Power Consumption – Idle 30 Watts
Antenna Characteristics Receive Transmit Frequency 10.95 – 12.75 Ghz 13.75 – 14.5Ghz Gain (±.2dBi) 39.7 dBi 41.6 dBi VSWR 1.30:1 Beamwidth in Orbital Arc -3dB 1.63o 1.36o First Sidelobe Level ( ±2dB) -23dB -23dB Radiation Pattern 29-25 Log Θ 29-25 Log Θ Antenna Noise Temperature 30o EL 50o K Polarization Linear Linear Allowable Transmit Power 25 Watts Cross-Pol Isolation-Std VSAT On-Axis -30dB -30dB Max Off-Axis within 1dB BW -28dB -26dB Maximum Off-Axis -21dB -25dB Cross-Pol Isolation – Global Mode-Matched Feed On-Axis -35dB -35dB Max Off-Axis within 1dB BW -30dB -30dB Maximum Off-Axis -22dB -30dB Feed Port Isolation TX/RX -80dB
Physical Data Approximate Weight - Rugged Cases (Hardigg) 220 lbs Positioner 140lbs. 27”x37”x16” Reflector/Feed/BUC/Controller 80lbs. 27”x37”x16”
Antenna Controller One button operation automatic satellite acquisition with integrated GPS/Compass/Level Sensors and user configurable satellite selection Portable Power Supply/Display Unit Weight: Power Supply / Display Unit 4.5 lbs / .5 lbs. Dimensions Power Supply ( Approved) 9”Wx10.25Dx2.5”H Display Unit 5½”W x 3¼”D x 1-3/8”H Rack Mount (1U) Weight 4.5 lbs Dimensions (inches) 19”W x 8.0”D x 1.75”H
Environmental Wind Operational 45 mph @ 600 F Stowed @ Zenith 60 mph Temperature Operational -20°F to 125°F |
|
|